2 thoughts on “About the electroplating problem of diamond ring”

  1. Due to the long -term wear of the alloy material plated on the surface of the jewelry, the material of the jewelry is revealed. Even if 75%of the gold is added with a 25%alloy, his color is still yellow! After wearing 18K gold jewelry for too long, it will show yellow. In fact, it is not yellow, but it is yellow!
    Is the following questions:
    1. Electroplating does not need to remove the diamond, but add a protective layer in the place where the original wear is severe! Diamond does not affect electroplating, so there is no need to remove the diamond!
    2. The electroplating is basically sent to the manufacturer or the processing location of the merchant. The store does not have the process ability and hardware instrument equipment of the electroplating, and of course it is not absolute. Like
    tesiro R N, even diamond cutting
    grinding
    can move to the store to demonstrate on the spot, what else is absolute!
    3. Zhou Shengsheng did not give electroplating, I don't know this.
    4.18k gold must know that 75%are gold. Most of the plating should be alloys that change the color of 18K gold jewelry,
    5. The original steel prints after the electroplating should be there, but the steel print that was not clear at first may be more blurred!
    Report! The answer is complete! Please score!
    (*^__^*)

Leave a Comment